| |
- Heavy cabinet will not move during play, yet it is easy to move for
cleaning or vacuuming.
- Cabinet and legs are covered with a heavy, glossy vinyl which is
resistant to wear and use.
- The vinyl on the legs and the leg materials will resist denting by a
vacuum cleaner and use.
- New red, white, and blue play surface is especially cold pressed at
the factory under a one hundred ton press process to ensure that all
playsurfaces are perfectly flat.
- Precision air delivery is assured by an enclosed air delivery plenum
which is engineered to provide full air delivery to each air hole in the
playsurface.
- Playing surface is thick High Pressure Laminate - the same as
traditional kitchen countertops to ensure long term play and
attractiveness.
- The graphics are embedded - beneath a layer of clear, wear proof
melamine, which will not scratch off.
- Playsurface is 1" thick.
- The aluminum rails make for super fast play.
- Scoring unit creates play excitement with sound and lights.
- Scoring unit operates either on (4) AA Batteries or plugs into any
standard electrical outlet with the supplied voltage adapter.
- Rubber leg boots assure both a means for perfect leveling and
eliminate any table movement associated with a screw in leg leveler.
- Toll free technical and assembly information line allows you to talk
directly to an engineer if ever needed.
- Game has an on/off switch.
- Game uses a specifically engineered, UL approved, high output, low
noise motor which plugs into any standard electrical outlet.
- Game puck return features no moving parts to ensure easy play and
start up after each goal.
- Molded corners eliminate any rough edges while allowing for continued
fast play.
- Game assembly takes less than 30 minutes with all necessary parts and
complete instructions included with the game for ease of assembly.
- All game components are exclusively engineered by Carrom using its
100+ years of game and toy making experience and expertise.
- Game is UL tested and approved for consumer safety where appropriate.
- This game is finely constructed by Carrom in Ludington, Michigan using
only the most durable of construction materials to provide years of rugged
playtime enjoyment.
- UL Approved Electric High Output Motor with 100
Cubic Feet Per Minute Air Output
- Aprons are ¾" Thick 45 Pound Particleboard with
Spektrum Melamine on Exterior
- Playsurface is 1" Thick
- Playsurface is Manufactured using a Cold Press
Process for Assured Flatness
- Playsurface has .060" High Pressure Laminate with
Impregnated Graphics for Long Lasting Appearance
- Playsurface is Supported by steel "beams"
- ABS Puck Catcher is Designed to Eliminate Hang-ups
of Puck and for Quick Puck Return
- Puck Catcher Allows for Easy Addition of Optional
Scoring Unit
- Legs are Miterfold Construction Covered with Black
Vinyl and Legboots for Easy and Accurate Leveling
- Aluminum Side and End Rails Make for Fast Play
- Comes with Round Pucks - 1 Black, 1 Blue
- 7' Game Table Size When Setup - 84 7/16" Long ; 44
7/16" Wide; 31 9/16" High
- 7' Carton Dimensions - 86 ½" x 48" x 8" - 19.2
cu.ft.
- 7' Cabinet Weight Approximately 207 Pounds with
Scoring Unit
- Setup Includes Only the Assembly the Puckcatchers,
Legs, and Scoring Unit
|
